| Introduction： Advantage:
* Anti-skid performance
* Bright and rich color,marking is beautiful & safer driving
Consumption (Actual consumption depends on the roughness of pavement)
|
Reference Table of Material Consumption |
|
|
Colorful Thermoplastic Anti-skid Paint |
|
Primer |
0.15kg/㎡ |
|
Paint |
8kg/㎡ |
|
Glass Beads |
0.4kg/㎡ |
|
Aggregate |
3kg/㎡ |
Technical Data:
·Curing time:≤3minutes
·Compression strength:≥8MPa
·Crack resistance in low temperature:In -10℃ no crack after three cycles
·Anti slide swing valve:≥45BPN
·Resistance to deformation(60℃,0.5kg/cm2)
Color:White/Yellow/Customize color
The matters needing to attention during the construction
1. The road surface should be dry during construction and keep the road clean
2. During the construction,the temperature should not be below 15 ℃,if the road surface is humidity construction is forbidden
3. When the paint is heated in the hot melt kettle,the temperature should be controlled at 180℃ to 220℃,at the same time fully mixing
4. After the primer completely dry,then to apply the paint |
