Introduction: Advantage:
* The construction speed is quick ,the construction equipment is simple,the construction cost is low
* Keep a good light & color of marking and make the marking bright and clean
* Tough film
* Anti-water & anti-acid and also not easy to be contaminated with grease and asphalt
Construction method:Brush application & spraying application
Consumption (Actual consumption depends on the roughness of Pavement )
|
Solvent road marking paint |
Thickness |
0.2mm(Dry film) |
Consumption of paint |
0.4kg/㎡ |
Technical Data:
·Curing time:≤10minutes
Color:White/Yellow /Customize other colors
Typical installation areas:
·Low grade highway
·Small city streets with small traffic
·Residential district, factory road
·Temporary and rapid refurbishment Road
Attention of construction
1. Before construction, the pavement should be cleaned, with the exception of dust and dirt to ensure the adhesion and adhesion of the paint and the pavement
2. During construction, the temperature should be kept above 0 ℃
3. It is strictly forbidden to carry out construction on wet pavement
|