Introduction: Advantage:
* Material from Evonik Industries
* Wear resistance is 2 times better than thermoplastic marking
* Stain resistance,anti-oil,anti-water
* Excellent aging resistance
* Environment protection,100% solid content and no volatile substances
Construction mode includes spraying application and screed application and extruded application
Principle of MMA concrete pavement marking paint high adhesion
Thermoplastic pavement marking paint can’t penetrate into the capillary of road surface (Blank part) MMA two-component concrete road marking paint can fully penetrate into the capillary of road surface
Thermoplastic pavement marking MMA concrete pavement marking
Consumption (Actual consumption depends on the thickness of marking & Roughness of pavement & Local temperature environment )
surface temperature 25℃ |
throwing application |
round dot application |
rib like application |
thickness |
4mm |
5mm |
6mm |
Consumption |
3.2kg/㎡ |
3.5kg/㎡ |
4.5kg/㎡ |
Hardner |
50g/㎡ |
50g/㎡ |
65g/㎡ |
primer |
150g/㎡ |
150g/㎡ |
150g/㎡ |
Glass beads |
0.6kg/㎡ |
0.6kg/㎡ |
0.6kg/㎡ |
Technical Data:
·Retroreflection valve: ≥350mcd(white)
·Curing time: ≤20minutes
·Density (g/cm³): 2
·Anti wearing valve: ≤35
·Adhesion:≤2
·The intact rate of the pavement marking (in the concrete pavement): ≥95%
Color: White/Yellow/Customize other colors
Typical installation areas:
·Airport
·Port
·Wharf pavement and highway
·National highway and other concrete road |