| Introduction： Advantage:
* Material from Evonik Industries
* Excellent brightness and night visibility
* Anti-crack & strong tenacity
* Wear resistance is 2 times better than thermoplastic marking
* Excellent aging resistance
* Environment protection,100% solid content and no volatile substances
Construction mode includes spraying application and screed application and extruded application.
Contrast about the adhesive strength between glass beads and paint
 |
 |
 |
| Spraying application |
Screeding application |
Vehicle-mounted spraying application |
 |
 |
 |
Consumption （Actual consumption depends on the thickness of marking & Roughness of pavement & Local temperature environment ）
|
surface temperature 25℃ |
Spraying application
(0.5mm-0.7mm) |
Screeding application
(1.2mm-1.5mm) |
|
thickness |
0.6mm |
1.2mm |
|
paint |
|
3kg/㎡ |
|
Hardner |
15g/㎡ |
45g/㎡ |
|
primer |
|
|
|
Glass beads |
0.5kg/㎡ |
0.5kg/㎡ |
Dosage table of curing agent (Used in B component)
|
Paint |
Hardner |
Surface temperature（℃） |
Ratio of BPO |
Surface dry time (Min) |
Curing time (Min) |
|
B component |
White color
powder |
5 |
750g-800g |
25 |
50 |
|
15 |
700g-750g |
20 |
35 |
|
25 |
650g-700g |
10 |
20 |
|
35 |
550g-600g |
8 |
15 |
Technical Data:
·Retroreflective valve: ≤350 mcd(white)
·Curing time: ≤15minutes
·Density (g/cm³): 2
·Abrasion resistance: ≤35mg
Color:White/Yellow /Customize other colors
The matters needing to attention during the construction
1. Dry & Clean & flat of road surface.
2. Damaged road should be repaired before applying.
3. Before applying,should add the hardner according to the ratio to the MMA two-component (Component B) pavement marking paint,then stir well.
4. Avoid breathing vapors,eyes and skin should not touch the coating.
5. During Construction,eating and drinking and smoking is prohibited.
Attention of construction
1. Clean and dry road surface.
2. Construction environment temperature is about 10℃ to 40℃，surface temperature generally is above 5 ℃。
3. The curing time depends on the consumption of curing agent & the temperature of construction environment,but has nothing to do with the thickness of the coating.
4. Strictly prohibited from direct sunlight during transport and storage,stored in ventilated and shade and dry place,the storage temperature should be controlled in 0℃ to 40℃.
5. During screeding application,it is recommended that two scraper buckets be equipped for continous replace. |
